PE063ZA

Fastening angle with two buttonholes on the vertical side. The valve can be fixed on the horizontal part using the specific holes: suitable M4 screws…

PE0760W

Black Pin Protection cap for PEB91 and 93 Series.

PE092

White Pin protection cap for Dynasty Valve 92 series

PE091CV

Control valve for the whole 91 series

PE091SOS

Two-nole wrench for Kv discs’ management.

PE092CV

Differential pressure regulator and flow pre-setting for 92 series.

PE093CV

Control valve for the whole 93 series

0BF1G

Wheel (gear box) for BF1SE valves

T39P/80

Thermometer with 0-80°C graduated.

TP.D

Optional Extra to convert full bore drain to an extra test point, can be permanantly fitted or used by commissioning engineer to use on different…

VENT

Turnable manual air vent with o-ring

HMP-4PJN

4 port motorised valve with 0.4kv-2.5kv, supplied loose with union connections to attach directly to Pettinaroli UK Xterminator valve assembly.…

HMP-4PJN.LL

4 port motorised valve with 0.4kv-2.5kv, supplied loose with union connections to attach directly to Pettinaroli UK Xterminator valve assembly.…

FK-FUA

Pair of 3/4" adapter rings to convert Euro-conus fitting to flat face male. Includes rubber washers. Compatible with all Pettinaroli Euro-cone and…

XTEFK (80mm bypass)

Pair of 1 1/8" union to 1/2" Female BSP, with black EPDM washer. Compatible for use on all Pettinaroli UK 80mm bypass assemblies (mains side)

XTEFK (70mm bypass)

Pair of 1 1/8" union to 1/2" Female BSP, with Green FKM O-Ring. Compatible for use on all Pettinaroli UK 70mm bypass assemblies (mains side)

FK-M

Fitting Kit, pair of parallel BSP male screwed adapter to suit euroconus fittings.

FK-F

Fitting Kit, pair of DN15 BSP Female screwed adapters to suit euroconus fittings.

FK-CS

Fitting Kit, pair of copper capillary solder fittings to suit euroconus fittings.

FK-CC15

Fitting Kit , Pair of copper compression fittings 15mm.